-
SpeedFace V4L
Linux-Based Hybrid-Biometric Access Control & Time and Attendance Terminal with Visible Light Facial Recognition & Palm Recognition Features · Visible Light Facial Recognition · Anti-spoofing algorithm against print attack (laser, color and B/W photos), videos attack and 3D mask attack · Multiple verification methods: Face / Palm / Card / Password · Available card modules: 125kHz ID card (EM) / 13.56MHz IC card / HID card / Felica card · Supplement light with adjustable brightness · 800 face templates capacity, 800 palm templates capacity
-
SpeedFace-V5L with 10000 Faces
SpeedFace-V5L [TI] is a fully upgraded version of the SpeedFace-V5L[TD] visible light facial recognition body temperature detection terminal, using Thermal Imaging intelligent engineering facial recognition algorithms and the latest computer vision technology. It supports both facial and palm verification with large capacity and speedy recognition, as well as improves security performance in all aspects.
-
SpeedFace-V5L with 6000 Faces
Facial verification available with masks
Anti-spoofing algorithm
Visible light facial recognition -
TL400B
Various access for your convenience – fingerprint/password/card/key/smart phone
European standard mortise – the door locks by itself once close
Enhanced security by random password for code access
Idle handle design to prevent from forcible entry
Voice guide for easier and more convenient use
Voice volume is adjustable
Smart alarm for low battery & illegal operation
Normal open mode
External terminals to draw backup power from a 9V battery -
TS200
TS200 is a single-lane tripod turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes TS200 highly durable. TS200 tripod arms are normally held in a locked position, thus denying access to the secured side.
Upon TS200 reader (RFID and/or fingerprint) positively recognizing a user’s valid access card or fingerprint, its tripod arms unlock, thus allowing users passage to the secured side. During emergencies and power outages the tripod arms completely collapse, thereby ensuring users FAST unencumbered exit to safety.
-
Tyre Killer (3 Meter)
Electromechanical tyre killer is one of the most high-end vehicle access control products to prevent vehicle intrusion. Drive unit is placed into one end of the tyre killer and the product is installed above ground level. its “one- piece” design is aimed to achieve smooth transmission of motion as well as minimize the effect of external factors. To operate this device, you just need to use the remote controller to raise the spikes and it will be raised within 2 seconds for blocking vehicles in single directional driveway.
-
Uface800 with Battery
Dual-Mode Biometric Data Collection Terminal
The uFace800 dual-mode, biometric time and attendance terminal includes both a camera for facial recognition and a fingerprint capture device for versatile and secure biometric applications.
-
Uface800/RFID/Battery
• Stores up to 1,500 facial and 3,000 fingerprint templates
• Multi-language support
• Enhanced face detection and verification speed
• Advanced, user-friendly interface
• Battery backup, allowing approximately 4 hours of
continuous operation
• New Framework firmware allows easily extended functions
to customize to specific end user requirements
• Single facial template is registered per user
• Wi-Fi as a standard feature
• Presented photo detection: able to distinguish between a
live image and a photo
User friendly UI and menu system design
• User level duplicate punch prevention
• Tip entry support
• Multiple level job code support
• Customizable user access control privileges
• Web server support as a standard function
• Automatic status key switch
• Self-service API
• Customizable bell schedules
• Private or public SMS messaging support -
UHF1-10E/F
UHF 5 series and UHF 10 series reader are a new generation of UHF RFID series products for our company’s independent research and development of the long distance card reader system in the personnel management,goods management and vehicle management.
The product uses the industry’s most cost-effective UHF card reader chip, and the part of swing card adopts the module integrated design, making the product to meet the technical requirements of the parking lot.Meanwhile, the utility model has the advantages of stable reading performance, good consistency, low working current and temperature, long service life, and small external influence, and the product adopts the waterproof outer shell design. -
UR10RW-F/E
Wiegand 26 output(Default);Wiegand 34 (Optional)
• With antenna,active card search mode
• USB data format output
• USB power supply,no drive
• Data Reception Time:less than 90ms
• Multi-system :Windows,Linux,Android,IOS -
VR10
ZKTeco radar sensor for vehicle detection VR10 is developed to detect and identify various vehicles (motorcycles, cars, trucks), pedestrians, and small (distant) objects within a detection area from 1m to 6m around the boom barrier.
Through linkage with the main board of the barrier, VR10 can help prevent vehicles from smashing the obstacles or damaging any properties or passers-by while allowing automatic boom closing. -
X628-C/ID
The firmware of X628-C has been upgraded to the New Firmware. It brings many new experiences, including the new stunning GUI, rock-solid stability, faster matching speed and better expandability. Users can easily manage data by networking X628-C via RS232, TCP/IP, and USB-host. Most importantly, all the functions can still operate in a networking state. X628-C is compatibility with various types of USB flash disks, ADMS and former SDK. It also supports data backup and retrieve to avoid the risk of accidental deletion. It promotes the fingerprint time & attendance management to the next level. You can get the best of benefits from the X628-C.
-
ZK-BOL1219-A
BOL1219-A is a high-quality automatic bollard which is used widely to protect security areas from vehicle intrusion. It is an ideal solution for entrance with high security requirements. Raising time of BOL1219-A is 3 seconds. Even if the intrusion is from high tonnage vehicle in high speed, the bollard will stop the vehicle easily because it is so solid that the vehicle will break after impact instead. There are also some extra safety precautions in the design of BOL121 9-A. The LED bar on the bollard can effectively avoid accidents caused by poor vision of drivers at night. In case of power failure, the bollard can be lowered manually. Equipped with PLC (Programmable Logic Controller), various control methods can be achieved easily, such as biometric readers, remote control and push button station. The bollard is commonly found in customs, ports, prisons and military bases where traffic guidance is needed to protect people and property. This product provides ideal access control in areas mentioned above and raises the level of security.
-
ZK-D100S
• Portable metal detector, convenient to take.
• It can be recharged. It needs 4-6 hours for charging. (standard 9V battery ,the charger and rechargeable
battery are ordered additional)
• The alarm terms is sound and light alarm simultaneously, or vibration and light alarm simultaneously.
You can choose the operate terms optionally.
• When the low sensitivity on-off is pressed, the metal detector will only alarm when it finds big
metal object
• Ni-MH Battery and DC charge cable (for option) -
ZK-D180
ZK-D180 is the ZKTeco self-developed compact size hand held metal detector featured with a detection indicator right in the middle of its main body detecting the sizes of detected objects and visualizing in different color (Green to Red), a perfect tool for speeding up security process. The controllable sound and vibration effect is another highlight, security guard can identify the potential dangerous quietly.
-
ZK-D4330
Features: · 33 detection zones · 7″LCD HD display interface · Remote control · Simple installation and use · In and out count · Excellent anti-interference ability and stability · Each zone has 300 adjustable sensitivity level · Supports various language interface customization · Higher accuracy and verification speed · Pass count and Alarm count memory function.
-
ZK8500R
ZK8500R is a USB fingerprint scanner and card issue device that provides a simple and efficient way to register user fingerprints and card numbers with ZKTeco Software. This device can capture fingerprint image or read card serial number (ID/Mifare) directly and upload to the system by USB interface. ZK8500R would save money as it can work as ZK4500+CR10E+CR10M, and also can save time, especially when a high volume of users will be using ZKTeco systems on site.
-
ZKCP100
CS-290e Card Printer recto verso Ecraser écriture personnalisée. Imprimez vos cartes d’identification en haute définition quel que soit votre volume d’impression avec l’imprimante HiTi CS290e, imprimante à sublimation polyvalente.
Haute efficacité
Impression à grande vitesse
Augmentation du temps de disponibilité avec moins d’interruption du personnel
Entrée haute capacité (en option) -
ZKX5030A
ZKX5030A X-ray inspection system increases the operator’s ability to identify potential threats; the device is designed to scan briefcases, carry on baggage, small cargo parcels. ZKX5030A uses reliable high quality single energy X-ray generator. With the superb image algorithm, ZKX5030A could offer clear scanning image, which allows operators to identify potential threat items visually. With ergonomic modern design, ZKX5030A could help operators to identify suspicious items fast and accurately.
-
ZKX6550A
ZKX6550A is a single energy X-ray screening system that provides a highly economical visual inspection solution for carry-on luggage. ZKX6550A uses reliable high quality X-ray generator. With the superb image algorithm, ZKX6550A could offer clear scanning image, which allows operators to identify potential threat items visually. ZKX6550A has innovative biometric identify function for operators, improving the security of system and preventing operator from forgetting password. With ergonomic modern design, ZKX6550A could help operators to identify suspicious items fast and accurately.
ALL PRODUCTS LOADED !
