26 results

  • Sort by
    ...
  • BG1030L

    Efficient transmission structure without spring ensures long-lasting and stable operation of the product.
    24V DC Brush Motor
    Interactive LED Design
    Telescopic Boom
    RS485 Communication

  • BG1045

    ZKTeco BG1000 series barrier gates adopt ZKTeco interactive LED chassis design, programmable control panel, and adopt high-efficiency Brushless DC motor and ZKTeco SCM421 material gear transmission structure. It has the advantages of fast speed, stable quality, rich function expansion, and so on. It is a better comprehensive performance barrier gate.

  • CMP-200/PB1010L

    Better experience with auxiliary traffic lights in the main body
    ·Support anti-smash and automatic closing with an infrared detector, loop detector, radar detector
    ·Arm direction can be exchanged between leftward and rightward according to site application
    ·Opening and closing angle of 90° ±2°
    ·Over voltage protection
    ·Support LPR, UHF reader controller and other devices for recognition and other A&C functions

  • FBL200

    ZKTeco FBL200 single lane flap barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. The FBL200 is a single lane flap barrier turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL200 highly durable.
    FBL200 barriers are normally held in a locked position, thus denying access to the secured side. Upon FBL200’s reader (RFID and/or fingerprint) positively recognizing a user’s valid access card or fingerprint, its barriers retract upward automatically, thus allowing users passage to the secured side.

  • FBL2000

    Choice of reader (RFID or fingerprint)
    LCD on the flap barrier control board
    Optional 90cm passage for handicap
    SUS304 stainless steel (optional SUS316)

  • FBL220

    The ZKTeco FBL220 dual-lane flap barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. The FBL220 series should work together with the FBL200 series to build multiple lanes. The FBL220 is a flap barrier turnstile for additional Lane series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL220 highly durable.

  • FBL300

    The ZKTeco FBL300 single lane flap barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. The FBL300 is a single lane flap barrier turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL300 highly durable.

  • FBL320

    The ZKTeco FBL320 dual-lane flap barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. The FBL320 series should work together with the FBL300 series to build multiple lanes. The FBL320 is a flap barrier turnstile for additional Lane series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL320 highly durable.

  • FBL5000

    The FBL5000 Pro is a single lane flap barrier turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL5000 highly durable.
    FBL5000 Pro barriers are normally held in a locked position, thus denying access to the secured side. Upon FBL5000 Pro’s reader (RFID and/or fingerprint) positively recognizing a user’s valid access card or fingerprint, its barriers retract upward automatically, thus allowing users passage to the secured side.

  • FBL5200

    The FBL5200 Pro is a Flap Barrier Turnstile for additional Lane series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL5200 Pro highly durable.
    FBL5200 Pro barriers are normally held in a locked position, thus denying access to the secured side. Upon FBL5200 Pro’s reader (RFID and/or fingerprint) positively recognizing a user’s valid access card or fingerprint, its barriers retract upward automatically, thus allowing users passage to the secured side.

  • FHT2400

    FHT2400 Biometric Full Height Turnstile FHT2400: Full Height Turnstile FHT2411: Full Height Turnstile with RFID Access Control System FHT2422: Full Height Turnstile with Fingerprint and RFID Access Control System

  • ProBG2000

    ZKTeco Pro BG 2000
    . LED light strip is optional for the boom.
    . Mean Cycles Between Failure (MCBF) is upto 5 million times.The product lifespan is 10 times longer the traditional barrier gate.
    . The gate’s opening/closing speed is quick and can widely adjust from 0.9s- 10s, depends on vehicle flow and boom length.
    . It can operate normally at temperature as low as -45°C and as high as 75°C.
    . Wear-resistant, no mechanical impact, and impact absorption in motion.
    . Automatically detects Power-off and lifts the Boom.
    . When a Vehicle hits the boom, it swings out to avoid further damage. It has impact-resistance rubber strip.
    . Supports fleet mode and open recording function. Gate can be closed after vehicle sensor has detected specified number of vehicles passed.
    . Supports global standard voltage of 100-240V AC and 24VDC low voltage power supply.
    . Low power consumption and energy saving design. lts barrier gate can save upto 500kWh per year.

  • TS200

    TS200 is a single-lane tripod turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes TS200 highly durable. TS200 tripod arms are normally held in a locked position, thus denying access to the secured side.

    Upon TS200 reader (RFID and/or fingerprint) positively recognizing a user’s valid access card or fingerprint, its tripod arms unlock, thus allowing users passage to the secured side. During emergencies and power outages the tripod arms completely collapse, thereby ensuring users FAST unencumbered exit to safety.

  • TS5022A

    Fully automatic
    Anti-tailgating
    Flexible reader installation
    Tripod-arms unlock & drop during emergencies / power loss
    SUS304 stainless steel casework & tripod arms

  • Tyre Killer (3 Meter)

    Electromechanical tyre killer is one of the most high-end vehicle access control products to prevent vehicle intrusion. Drive unit is placed into one end of the tyre killer and the product is installed above ground level. its “one- piece” design is aimed to achieve smooth transmission of motion as well as minimize the effect of external factors. To operate this device, you just need to use the remote controller to raise the spikes and it will be raised within 2 seconds for blocking vehicles in single directional driveway.

  • ZK-BOL1219-A

    BOL1219-A is a high-quality automatic bollard which is used widely to protect security areas from vehicle intrusion. It is an ideal solution for entrance with high security requirements. Raising time of BOL1219-A is 3 seconds. Even if the intrusion is from high tonnage vehicle in high speed, the bollard will stop the vehicle easily because it is so solid that the vehicle will break after impact instead. There are also some extra safety precautions in the design of BOL121 9-A. The LED bar on the bollard can effectively avoid accidents caused by poor vision of drivers at night. In case of power failure, the bollard can be lowered manually. Equipped with PLC (Programmable Logic Controller), various control methods can be achieved easily, such as biometric readers, remote control and push button station. The bollard is commonly found in customs, ports, prisons and military bases where traffic guidance is needed to protect people and property. This product provides ideal access control in areas mentioned above and raises the level of security.

  • ZK-D100S

    • Portable metal detector, convenient to take.
    • It can be recharged. It needs 4-6 hours for charging. (standard 9V battery ,the charger and rechargeable
    battery are ordered additional)
    • The alarm terms is sound and light alarm simultaneously, or vibration and light alarm simultaneously.
    You can choose the operate terms optionally.
    • When the low sensitivity on-off is pressed, the metal detector will only alarm when it finds big
    metal object
    • Ni-MH Battery and DC charge cable (for option)

  • ZK-D1065

    • 6 detection zones
    • 100 sensitivity levels
    • LED display
    • Counter for alarm and people
    • Synchronous sound & LED alarm

  • ZK-D180

    ZK-D180 is the ZKTeco self-developed compact size hand held metal detector featured with a detection indicator right in the middle of its main body detecting the sizes of detected objects and visualizing in different color (Green to Red), a perfect tool for speeding up security process. The controllable sound and vibration effect is another highlight, security guard can identify the potential dangerous quietly.

  • ZK-D2180

    ZK-D2180 18 detection zones 256 sensitivity levels 3.5’’ LCD display People and alarm counting Synchronous sound & LED alarm TCP/IP communication Remote control Linkage with turnstile Support to connect with app.

  • ZK-D4330

    Features: · 33 detection zones · 7″LCD HD display interface · Remote control · Simple installation and use · In and out count · Excellent anti-interference ability and stability · Each zone has 300 adjustable sensitivity level · Supports various language interface customization · Higher accuracy and verification speed · Pass count and Alarm count memory function.

  • ZKX100100

    X-ray Baggage Inspection System
    Luggage image and Walk Through Metal Detector status display on the same screen
    Typical steel penetration up to 35mm
    Threat Image Projection (TIP)
    Operator desk with two monitors

  • ZKX5030A

    ZKX5030A X-ray inspection system increases the operator’s ability to identify potential threats; the device is designed to scan briefcases, carry on baggage, small cargo parcels. ZKX5030A uses reliable high quality single energy X-ray generator. With the superb image algorithm, ZKX5030A could offer clear scanning image, which allows operators to identify potential threat items visually. With ergonomic modern design, ZKX5030A could help operators to identify suspicious items fast and accurately.

  • ZKX6550A

    ZKX6550A is a single energy X-ray screening system that provides a highly economical visual inspection solution for carry-on luggage. ZKX6550A uses reliable high quality X-ray generator. With the superb image algorithm, ZKX6550A could offer clear scanning image, which allows operators to identify potential threat items visually. ZKX6550A has innovative biometric identify function for operators, improving the security of system and preventing operator from forgetting password. With ergonomic modern design, ZKX6550A could help operators to identify suspicious items fast and accurately.

Close My Cart
Close Wishlist
Recently Viewed Close
Close

Close
Navigation
Categories
Click to Chat!
#
Agent (Online)
×

We are here to help. Chat with us on WhatsApp for any queries.

Newsletter

Need an Installer ?

Please call us at: 0300 1223357 | 0335 4046470 or email at: [email protected]