EB1
₨ 260.00
4 sold in last 8 hours
70*14*20mm
Ultra Narrow Small
Surface Mount
70*14*20mm
Ultra Narrow Small
Surface Mount
Only logged in customers who have purchased this product may leave a review.
Related Products
The ZKTeco FBL320 dual-lane flap barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. The FBL320 series should work together with the FBL300 series to build multiple lanes. The FBL320 is a flap barrier turnstile for additional Lane series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL320 highly durable.
1,500 Faces, 2,000 Cards and 100,000 Records.
Multi-languages.
Communication: TCP/IP, USB-Host, Wi-Fi (Optional).
ZKX5030A X-ray inspection system increases the operator’s ability to identify potential threats; the device is designed to scan briefcases, carry on baggage, small cargo parcels. ZKX5030A uses reliable high quality single energy X-ray generator. With the superb image algorithm, ZKX5030A could offer clear scanning image, which allows operators to identify potential threat items visually. With ergonomic modern design, ZKX5030A could help operators to identify suspicious items fast and accurately.
X-ray Baggage Inspection System
Luggage image and Walk Through Metal Detector status display on the same screen
Typical steel penetration up to 35mm
Threat Image Projection (TIP)
Operator desk with two monitors
Biometric terminal allows you to recognize the faces of visitors and read the fingerprint. Mifare 13.56 MHz card reader (optional). Color 2.8″ TFT display. Communication interfaces: Ethernet, USB. Face template memory: 1500, RFID card memory: 2000, fingerprint memory: 2000, event log memory: 100,000.
TLEB102 is our new infrared sensor door switch. The exquisite proximity exit button offers an economical application with optimum performance widely used in access control system in all kinds of industries.
Electromechanical tyre killer is one of the most high-end vehicle access control products to prevent vehicle intrusion. Drive unit is placed into one end of the tyre killer and the product is installed above ground level. its “one- piece” design is aimed to achieve smooth transmission of motion as well as minimize the effect of external factors. To operate this device, you just need to use the remote controller to raise the spikes and it will be raised within 2 seconds for blocking vehicles in single directional driveway.
SC405 is a RFID Access Control Terminal which possesses a 2.0-inch color display with graphical UI, enabling simple and easy control. It has a built-in auxiliary input function which enhances the flexibility to be connected with wired detector or emergency switch. With multi-verification methods by combinations of PIN, password and card, high level of security and flexibility are guaranteed. Moreover, the product supports USB flash drive for offline data management, as well as is equipped with multiple alarm outputs such as Tamper Proof Switch and Duress Alarm. Its convenience and adaptability allow it to be well deployed in residential housing, offices and any other public facilities.
• 1.200 Faces, 1.500 Fingerprints, 100.000 Records and 2.000 Cards (Optional).
• Multi-languages.
• Communication: TCP/IP, USB-Host, Wi-Fi (Optional).
EFace10 is a touchless facial identification terminal featuring ZKTeco’s innovative Visible Light Facial Recognition technology. With the latest algorithm and Visible Light facial recognition technologies, the device will automatically perform recognition for a target in a long distance when it detects a human face in the detection distance to deliver better recognition quality in terms of speed and accuracy than the previous near-infrared facial recognition terminals.
BOL1219-A is a high-quality automatic bollard which is used widely to protect security areas from vehicle intrusion. It is an ideal solution for entrance with high security requirements. Raising time of BOL1219-A is 3 seconds. Even if the intrusion is from high tonnage vehicle in high speed, the bollard will stop the vehicle easily because it is so solid that the vehicle will break after impact instead. There are also some extra safety precautions in the design of BOL121 9-A. The LED bar on the bollard can effectively avoid accidents caused by poor vision of drivers at night. In case of power failure, the bollard can be lowered manually. Equipped with PLC (Programmable Logic Controller), various control methods can be achieved easily, such as biometric readers, remote control and push button station. The bollard is commonly found in customs, ports, prisons and military bases where traffic guidance is needed to protect people and property. This product provides ideal access control in areas mentioned above and raises the level of security.
ZKX6550A is a single energy X-ray screening system that provides a highly economical visual inspection solution for carry-on luggage. ZKX6550A uses reliable high quality X-ray generator. With the superb image algorithm, ZKX6550A could offer clear scanning image, which allows operators to identify potential threat items visually. ZKX6550A has innovative biometric identify function for operators, improving the security of system and preventing operator from forgetting password. With ergonomic modern design, ZKX6550A could help operators to identify suspicious items fast and accurately.
Reviews
There are no reviews yet.