FBL5000
₨ 814,950.00
18 sold in last 12 hours
The FBL5000 Pro is a single lane flap barrier turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL5000 highly durable.
FBL5000 Pro barriers are normally held in a locked position, thus denying access to the secured side. Upon FBL5000 Pro’s reader (RFID and/or fingerprint) positively recognizing a user’s valid access card or fingerprint, its barriers retract upward automatically, thus allowing users passage to the secured side.
Only logged in customers who have purchased this product may leave a review.
Related Products
Electromechanical tyre killer is one of the most high-end vehicle access control products to prevent vehicle intrusion. Drive unit is placed into one end of the tyre killer and the product is installed above ground level. its “one- piece” design is aimed to achieve smooth transmission of motion as well as minimize the effect of external factors. To operate this device, you just need to use the remote controller to raise the spikes and it will be raised within 2 seconds for blocking vehicles in single directional driveway.
The ZKTeco FBL320 dual-lane flap barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. The FBL320 series should work together with the FBL300 series to build multiple lanes. The FBL320 is a flap barrier turnstile for additional Lane series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL320 highly durable.
ZKX5030A X-ray inspection system increases the operator’s ability to identify potential threats; the device is designed to scan briefcases, carry on baggage, small cargo parcels. ZKX5030A uses reliable high quality single energy X-ray generator. With the superb image algorithm, ZKX5030A could offer clear scanning image, which allows operators to identify potential threat items visually. With ergonomic modern design, ZKX5030A could help operators to identify suspicious items fast and accurately.
BOL1219-A is a high-quality automatic bollard which is used widely to protect security areas from vehicle intrusion. It is an ideal solution for entrance with high security requirements. Raising time of BOL1219-A is 3 seconds. Even if the intrusion is from high tonnage vehicle in high speed, the bollard will stop the vehicle easily because it is so solid that the vehicle will break after impact instead. There are also some extra safety precautions in the design of BOL121 9-A. The LED bar on the bollard can effectively avoid accidents caused by poor vision of drivers at night. In case of power failure, the bollard can be lowered manually. Equipped with PLC (Programmable Logic Controller), various control methods can be achieved easily, such as biometric readers, remote control and push button station. The bollard is commonly found in customs, ports, prisons and military bases where traffic guidance is needed to protect people and property. This product provides ideal access control in areas mentioned above and raises the level of security.
• High Safety
• Long Service Life
• High Reading Rate
• High Chip Sensitivity
Flexible Storage Structure
• Reading and Writing Repeatedly
•Adhesive Design, Easy Installation
•Anti-tear: when torn, it will be destroyed
- KTeco LM-2802 Bangladesh, EM Lock Bangladesh
- Power-on to lock
- Holding Force: 280kg
- Working Voltage: DC12V/24V input
- Weight: 1.9kg
- Size: 250L×47W×25.5Hmm
- Lock Indicator
ZKTeco BG1000 series barrier gates adopt ZKTeco interactive LED chassis design, programmable control panel, and adopt high-efficiency Brushless DC motor and ZKTeco SCM421 material gear transmission structure. It has the advantages of fast speed, stable quality, rich function expansion, and so on. It is a better comprehensive performance barrier gate.
Biometric terminal allows you to recognize the faces of visitors and read the fingerprint. Mifare 13.56 MHz card reader (optional). Color 2.8″ TFT display. Communication interfaces: Ethernet, USB. Face template memory: 1500, RFID card memory: 2000, fingerprint memory: 2000, event log memory: 100,000.
SC405 is a RFID Access Control Terminal which possesses a 2.0-inch color display with graphical UI, enabling simple and easy control. It has a built-in auxiliary input function which enhances the flexibility to be connected with wired detector or emergency switch. With multi-verification methods by combinations of PIN, password and card, high level of security and flexibility are guaranteed. Moreover, the product supports USB flash drive for offline data management, as well as is equipped with multiple alarm outputs such as Tamper Proof Switch and Duress Alarm. Its convenience and adaptability allow it to be well deployed in residential housing, offices and any other public facilities.
ProBio is a multi-Biometric Access Control Terminal
Encrypted communication protocol
Live finger and face detection
High accuracy face algorithm
Special design for door frame
Electromagnetic lock
Input voltage DC 12V
Working current 450mA±5 %
Tensile force range 200kg±5 %
Lock body size 250x 47 x 25.5mm
Iron plate size 180x 38x 11mm
Reviews
There are no reviews yet.