SC405
₨ 24,200.00
13 sold in last 15 hours
SC405 is a RFID Access Control Terminal which possesses a 2.0-inch color display with graphical UI, enabling simple and easy control. It has a built-in auxiliary input function which enhances the flexibility to be connected with wired detector or emergency switch. With multi-verification methods by combinations of PIN, password and card, high level of security and flexibility are guaranteed. Moreover, the product supports USB flash drive for offline data management, as well as is equipped with multiple alarm outputs such as Tamper Proof Switch and Duress Alarm. Its convenience and adaptability allow it to be well deployed in residential housing, offices and any other public facilities.
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco BG1000 series barrier gates adopt ZKTeco interactive LED chassis design, programmable control panel, and adopt high-efficiency Brushless DC motor and ZKTeco SCM421 material gear transmission structure. It has the advantages of fast speed, stable quality, rich function expansion, and so on. It is a better comprehensive performance barrier gate.
BOL1219-A is a high-quality automatic bollard which is used widely to protect security areas from vehicle intrusion. It is an ideal solution for entrance with high security requirements. Raising time of BOL1219-A is 3 seconds. Even if the intrusion is from high tonnage vehicle in high speed, the bollard will stop the vehicle easily because it is so solid that the vehicle will break after impact instead. There are also some extra safety precautions in the design of BOL121 9-A. The LED bar on the bollard can effectively avoid accidents caused by poor vision of drivers at night. In case of power failure, the bollard can be lowered manually. Equipped with PLC (Programmable Logic Controller), various control methods can be achieved easily, such as biometric readers, remote control and push button station. The bollard is commonly found in customs, ports, prisons and military bases where traffic guidance is needed to protect people and property. This product provides ideal access control in areas mentioned above and raises the level of security.
The ZKTeco FBL320 dual-lane flap barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. The FBL320 series should work together with the FBL300 series to build multiple lanes. The FBL320 is a flap barrier turnstile for additional Lane series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes FBL320 highly durable.
Electromagnetic lock
Input voltage DC 12V
Working current 450mA±5 %
Tensile force range 200kg±5 %
Lock body size 250x 47 x 25.5mm
Iron plate size 180x 38x 11mm
CS-290e Card Printer recto verso Ecraser écriture personnalisée. Imprimez vos cartes d’identification en haute définition quel que soit votre volume d’impression avec l’imprimante HiTi CS290e, imprimante à sublimation polyvalente.
Haute efficacité
Impression à grande vitesse
Augmentation du temps de disponibilité avec moins d’interruption du personnel
Entrée haute capacité (en option)
UHF 5 series and UHF 10 series reader are a new generation of UHF RFID series products for our company’s independent research and development of the long distance card reader system in the personnel management,goods management and vehicle management.
The product uses the industry’s most cost-effective UHF card reader chip, and the part of swing card adopts the module integrated design, making the product to meet the technical requirements of the parking lot.Meanwhile, the utility model has the advantages of stable reading performance, good consistency, low working current and temperature, long service life, and small external influence, and the product adopts the waterproof outer shell design.
ProBio is a multi-Biometric Access Control Terminal
Encrypted communication protocol
Live finger and face detection
High accuracy face algorithm
Special design for door frame
Electromechanical tyre killer is one of the most high-end vehicle access control products to prevent vehicle intrusion. Drive unit is placed into one end of the tyre killer and the product is installed above ground level. its “one- piece” design is aimed to achieve smooth transmission of motion as well as minimize the effect of external factors. To operate this device, you just need to use the remote controller to raise the spikes and it will be raised within 2 seconds for blocking vehicles in single directional driveway.
• 1.200 Faces, 1.500 Fingerprints, 100.000 Records and 2.000 Cards (Optional).
• Multi-languages.
• Communication: TCP/IP, USB-Host, Wi-Fi (Optional).
Biometric terminal allows you to recognize the faces of visitors and read the fingerprint. Mifare 13.56 MHz card reader (optional). Color 2.8″ TFT display. Communication interfaces: Ethernet, USB. Face template memory: 1500, RFID card memory: 2000, fingerprint memory: 2000, event log memory: 100,000.
G3 is a multi-Biometric Time Attendance & Access Control Terminal
Encrypted communication protocol
Quick face enrollment process
Easy to install
Out of stock
The ProID10WM family of card readers is designed to offer card technologies options to customers such as MIFARE.
With a robust all-weather protection and a beautiful modern design, the ProID family is the best choice for indoor or outdoor applications.
Reviews
There are no reviews yet.